Healthcare and pharmaceutical facilities run HVAC, ventilation, and cold storage systems around the clock to meet compliance standards. We reduce that energy load by 15–25% — without touching setpoints, compliance systems, or operations.
Healthcare and pharmaceutical facilities must maintain precise temperature, humidity, and air quality standards at all times. That non-negotiable baseline means systems run continuously — and most run harder than efficiency requires.
Every enPact technology is a retrofit that connects to existing systems without modification. Setpoints are never altered. Compliance systems are never touched. Savings come from improving efficiency within the existing operating parameters.
Two multi-story, 60,000 sq ft pharmaceutical research facilities operating 24/7/365 with rooftop Energy Recovery Units deployed Maxwell nanofluid across their chilled water systems. Energy Recovery Units — which capture and reuse heat from ventilation exhaust — are especially common in healthcare and pharma facilities due to their high outside air requirements.
When added to the run-around loop, Maxwell improved heat transfer at the exhaust fan recovery coil and air handler, allowing the circulating pump to run at lower flow rate and power. The result: 22% improvement in thermal energy recovery and a 13.6% reduction in pump energy consumption — with no changes to ventilation rates, setpoints, or any compliance system.
The operator is now expanding the deployment across additional chilled water loops on campus, with a projected full-campus value of $2M and a 3-year payback period.
The technology requirements of compliance-driven facilities align directly with what enPact Chillers was designed to deliver.
Book a free 30-minute discovery call. We'll review your facility energy profile and identify where the technology applies within your compliance requirements — at no cost and no obligation.