Food Service & QSR Food Retail Food Production Pubs, Bars & Restaurants Hotels & Built Environment Cold Storage Commercial Buildings Data Centers Healthcare & Pharma Heavy Industry
Supermarket refrigeration aisle
Home  /  Sectors  /  Food Retail & Supermarkets
Food Retail & Supermarkets

Half your energy bill
is keeping things cold.
We fix that.

Refrigeration accounts for up to 50% of a food retailer's total electricity consumption. We reduce that load by 12–25% — without touching product temperatures or compliance obligations.

12.6%
Daily energy reduction · convenience retail
13.65
kWh saved per day · per store
20–25%
Monthly cost reduction · food distribution
12mo
Typical payback period
The Problem

Refrigeration never stops.
Neither does the waste.

Open display cases, walk-in coolers, and freezer banks run continuously — day and night, 365 days a year. Most of that energy is wasted before it even reaches the product.

❄️
Refrigeration is your largest single cost
Up to 50% of a supermarket's total electricity goes to refrigeration. Compressors in display cases and walk-ins cycle continuously, and most run harder than they need to — wasting energy on every cycle.
Electrical noise across every circuit
The constant switching of refrigeration packs, HVAC systems, lighting, and POS equipment creates electrical noise that wastes energy upstream of all your equipment — invisibly, across every circuit in every store.
📋
ESG reporting pressure is growing
Food retailers face increasing Scope 2 emissions disclosure requirements from regulators, investors, and major brand partners. Verified energy reduction data directly strengthens your carbon reporting position.
Supermarket refrigeration equipment
The Solution

Layer 1 delivers immediate results.
Layer 2 deepens them.

FilterPro deploys first — reducing electrical waste across your entire store from day one. Refrigeration & Cooling then targets your largest load specifically, compounding the savings.

Layer 1 — Electrical · Always first
enPact FilterPro
Optimizes power quality across every circuit in your store simultaneously — refrigeration packs, HVAC, lighting, and POS systems. Particularly effective in food retail where high inductive loads from refrigeration motors create significant electrical noise. Retrofit installation — no changes to your existing equipment or systems.
6–18%
whole-site electrical reduction
Layer 2 — Thermal
enPact Refrigeration
& Cooling
Targets display cases, walk-in coolers, and freezer banks specifically — optimizing compressor runtime while maintaining exact product temperatures. Compatible with multi-pack systems, CO₂ refrigeration, and all major retail refrigeration configurations. No product or food safety impact.
20–40%
refrigeration energy reduction
Why start with FilterPro: A convenience retailer operating 24/7 achieved a 12.6% reduction in daily energy consumption from FilterPro alone — covering refrigeration, freezing, and lighting simultaneously. Adding Refrigeration & Cooling targets the compressor systems directly for compounding gains. The two technologies address different loss mechanisms, so their savings don't overlap.
Verified Results

National convenience retailer.
24/7 operation. Verified reduction.

12.6%
Daily energy reduction
13.65
kWh saved per day
4,982
kWh saved annually
12mo
Payback period
Daily consumption — before vs after
Before
108.70 kWh
After
95.05 kWh
Verified — Before/after installation comparison · 24/7 retail operation
National Convenience Retailer · 24/7 Operation
"The store consumes significant power due to refrigeration, freezing, and lighting — and achieved a 12.6% reduction with a single install."

A convenience store operating around the clock installed the enPact FilterPro IPF-30 device. With continuous power draw from refrigeration cases, freezers, and lighting — all running 24 hours a day — even a modest efficiency gain delivers significant annual savings.

Daily consumption dropped from 108.70 kWh to 95.05 kWh — a reduction of 13.65 kWh per day, every day. The installation required no store closure and no changes to product storage or operating procedures. Payback was achieved within 12 months.

Because only FilterPro was deployed here, adding enPact Refrigeration & Cooling to target the compressor systems directly would be expected to deepen savings further — targeting the dominant load in the store.

Supporting result — Global food distribution network · 17+ sites
20–25%
Monthly electricity cost reduction
17+
Sites deployed globally
Also Relevant

Why refrigeration optimization
matters most in this sector.

Three facts from the product documentation that frame the opportunity in food retail specifically.

Energy composition · Food Retail
50%
of supermarket energy used for refrigeration

Source: Emissis enPact product documentation. This is why refrigeration is always the primary Layer 2 target in food retail — even a 20% reduction on the refrigeration load delivers a 10% whole-site improvement.
Product compatibility · Retail refrigeration
All
major retail refrigeration configurations supported

enPact Refrigeration & Cooling is compatible with display fridges and cabinets, walk-in refrigerators and freezers, multi-pack systems, and CO₂ refrigeration — covering every configuration found in modern supermarkets and convenience stores.
FilterPro · Food retail applications
6–18%
Site-wide savings through power quality optimization

FilterPro is specifically designed for supermarkets, hypermarkets, and distribution centers — sites with high inductive loads from refrigeration packs, HVAC systems, and locations sensitive to power quality such as automation and PLC-controlled systems.
Get Started

See what your stores
could save this year.

Book a free 30-minute discovery call. We'll review your store energy profile and provide a projected savings figure — at no cost and no obligation.

Book a Free Assessment → View All Results

📞 951-744-5092  ·  ✉️ info@GoldenGSolutions.com