enPact FilterPro device at an industrial electrical panel
For California Food Producers · Powered by Emissis enPact

Cut refrigeration energy consumption up to 41.5%. Verified.

Emissis guarantees the payback period set out in your proposal — supported by formal M&V.

Read the Case Studies → Book a 30-min Call
Installs in hours
Preserves existing systems
Maintenance-free
kWh reduction validated by M&V
41.5%
Verified refrigeration energy reduction
Food processing site
26.5%
Verified refrigeration energy reduction
Refrigerated distribution center
8.97%
Verified refrigeration energy reduction
Ammonia chiller
✓
Payback period guaranteed by Emissis
As set out in the proposal · formal M&V
What it is

The enPact family. Two devices, one approach.

Patented capital equipment — hardware you own outright, sitting on your balance sheet as a capital asset. Bought once, installed once, yours forever. Two devices in the family, deployed based on where the reduction opportunity lives at your site:

enPact FilterPro
At the main electrical panel — whole-plant power quality & site-level reduction
enPact Refrigeration & Cooling
At individual refrigeration, freezer & HVAC circuits — deep load-specific reduction
Both are capital purchases
On your balance sheet and depreciable — installed in hours
enPact FilterPro device — installed at the main electrical panel
enPact FilterPro
At the panel
enPact Refrigeration & Cooling device — installed at individual refrigeration circuits
enPact R&C
At the unit
Where it sits

Connected at your panel. Felt across the plant.

FilterPro connects in parallel at your main electrical panel — it carries no load and conditions power quality at the source, so your refrigeration, chillers, motors, and pumps all draw cleaner power.

Refrigeration & Cooling installs at the individual unit — sensor-driven control at the evaporator trims compressor runtime on specific HVAC, chiller, and refrigeration loads for a deeper reduction.

Your equipment sees cleaner power — and your refrigerant, setpoints, and controls stay exactly as they are.

enPact family integration diagram: utility power arrives at the main electrical panel where FilterPro connects in parallel, and power flows out to HVAC, chiller, and compressor/motor loads — with enPact Refrigeration & Cooling installed at the HVAC/refrigeration unit for deeper load-specific reduction
Why it works

Proprietary technology. Real reductions.

enPact improves power quality at the source using proprietary carbon nanotube (CNT) and spintronics-based dielectric materials. The technology reduces electrical noise and reactive losses across inductive loads — motors, compressors, and refrigeration equipment.

Result: measurable kWh reduction, demonstrated against real operating conditions and validated via IPMVP-aligned M&V.

Diagram: noisy wasteful power feeding motors on the left, enPact FilterPro installed in parallel at the electrical panel in the middle, and conditioned efficient power feeding the same motors on the right — showing electron alignment, smoother current flow, and reduced losses
Why it matters

Capital equipment. Not another operating line item.

Refrigeration is 40–60% of a food processing plant's electric bill. Every point of kWh reduction flows straight to gross margin — and the savings survive whether CAISO rates swing up or down.

Unlike controls upgrades, refrigerant changes, or major mechanical retrofits, enPact installs in hours — a brief electrical isolation is the only interruption to normal operation. Performance measurement begins immediately after installation, with reductions formally validated through M&V. Your exact payback figure is confirmed after our engineering team reviews your utility data.

Diagram: refrigeration's share of a food processing plant's electric bill, and how kWh reduction flows directly into gross margin
The missing piece
This isn’t a purchase. It’s an investment with a guaranteed payback.
Most capital requests carry the performance risk on your side: you pay, and the return depends on projections holding. This one is structured differently. Emissis guarantees, in writing, the payback period set out in your proposal. If IPMVP-verified savings come in below the forecast kWh, Emissis credits back the difference in capital cost to restore the payback you were quoted — assessed against a formal savings verification report. The downside risk sits with Emissis, not with your capital budget.
How the Savings Guarantee works →
Capital, not operating expense
You buy the device. You depreciate it. Ownership stays with you.
The savings survive rate volatility
Utility costs are the least controllable line on your P&L. Cutting the underlying kWh means the savings are locked in whether CAISO markets swing up or down.
Production runs unchanged
Refrigerant, setpoints, and controls stay yours. Product quality, food safety compliance, and cold-chain integrity are preserved.
Built for CLFP-member operations

Whether you run canneries, olive presses, dairy plants, dehydrators, or freezer lines — the underlying problem is the same.

Compressors running longer than they need to. Heat exchange working harder than it has to. Electrical losses upstream of the compressor. The technology addresses all three regardless of refrigerant.

California food producer facilities — ammonia, DX, and motor-driven systems
Ammonia (NH3)
Large tomato, dairy, and freezer plants
Standard refrigerant for large-scale food processing in California. enPact FilterPro was verified on a live ammonia chiller at a global wholesale retailer (Canada) — electrical-side optimization that leaves the refrigerant loop untouched. System-specific fit for tomato paste, dairy, and freezer plants is confirmed during technical review.
DX · HFC · CO2
Non-ammonia refrigeration — all major system types
Verified in a food processing site (41.5% reduction) and a refrigerated distribution center (26.5% reduction). enPact Refrigeration & Cooling is documented compatible with DX systems (TEV & EEV), split-type & packaged units, VRV/VRF, ducted commercial systems, industrial refrigeration, cold storage, and multi-pack & CO2 refrigeration systems. Specific configurations are scoped during technical review.
Process motors
Pumps, blowers, and inductive loads
The same technology reduces electrical losses on plant motors, pumps, and blowers — with documented whole-site reductions of up to 18% where inductive load dominates. A secondary benefit when refrigeration is the primary target.
Verified across the systems you run

Same product family. Different system types.

Two verified deployment categories relevant to California food producers. Pick the one that maps to your plant.

enPact Refrigeration & Cooling device
enPact Refrigeration & Cooling
At the unit
Verified · Food Processing Site (U.K.)

Refrigeration energy cut 41.5% across 8 units at a food processing site.

Site-wide reduction of 11.7% at the main incomer. Measured over live ON/OFF comparison periods on a facility with cold-store, processing, and packing areas.

41.5%
Refrigeration reduction
11.7%
Site-wide reduction
130,685
kWh/yr saved
3
Sites in rollout
Product: enPact Refrigeration & Cooling
Measurement: Controlled ON/OFF testing, IPMVP-aligned M&V
Unit range: 12–73% reduction (2 units neutral) — transparent unit-level table in the PDF
Portfolio projection: 392,000 kWh/yr across the client's 3 sites
Also Verified · Refrigerated Distribution Center

Refrigeration energy cut 26.5% across 5 cold rooms and 3 freezer systems.

Winter-measured, seasonally adjusted. Both DX case studies are included in the download below.

26.5%
Refrigeration reduction
112,432
kWh/yr saved
8
Cold rooms + freezers
<12mo
Projected payback
Product: enPact Refrigeration & Cooling
Measurement: Winter-measured, seasonally adjusted (IPMVP-aligned M&V)
Applicability: Refrigerated distribution centers, cold storage warehouses
Result: Sub-12-month payback
Read both DX case studies →
Instant access after a short form. No sales call required.
enPact FilterPro device
enPact FilterPro
At the panel
Verified · Global Wholesale Retailer (Canada)

Refrigeration energy cut 8.97% on an ammonia chiller with a VFD-driven compressor.

Weather-adjusted validation on an ammonia-based chiller system with a VFD-driven compressor — a configuration often assumed to already be optimized. Savings held consistently across 12 operational days — operations, food safety, and controls remained fully intact.

8.97%
Validated reduction
9,942
kWh · 12 days
12days
Trial duration
6.03mo
Projected payback
Product: enPact FilterPro (electrical optimization on the ammonia side)
Measurement: Weather-adjusted comparison across 12 operational days
Applicability: Tomato paste, dairy, freezer, and other large ammonia plants
Result: Exceeded original business case projections
Read the ammonia case study →
Instant access after a short form. No sales call required.
Read the case studies

All three verified deployments. One form. Instant download.

Includes unit-level metering data, measurement & verification methodology, and portfolio-wide rollout projections. No sales call gate. No qualifying survey.

Get the case studies
Three verified case studies. Download links appear after you submit.
Ammonia Chiller (8.97%) · Food Processing Site (41.5%) · Refrigerated Distribution Center (26.5%)
First name is required.
Last name is required.
A valid business email is required.
Company is required.
Your role is required.
Please select at least one option.
Instant access — download links appear right after you submit.

Your data goes to Golden Grid Solutions only. Not sold. Not shared with third parties.